Belt Driving Cylinder For Motor Kit
Part. N° 29.5022
APPLICATIONS |
- Drive roller for low profile belt conveyors made using MiniTec 45mm profiles |
- End specifically made for use with Motor attachment kit Ø 20 |
TECHN. DATA / ITEMS SUPPLIED |
- Solid stainless steel roller, 50mm Dia. |
- Precision turned with tapered ends for belt tracking |
- Ø17mm Axles |
- Key comes with Motor Attachment Kit or can be ordered separately |
- Specify dimension L (belt width)
(See upper right picture) |
- 1 Rev (Pulley) |
6.184" (.515 FT) |
10 RPM (Pulley) |
5.15 Ft./Min. (Belt Speed) |
29.5031 Motor attachment kit 20 has a 15 tooth sprocket on the motor & a 12 tooth sprocket on the pulley. This increases belt speed by 25% |
10 RPM Motor Speed |
6.44 Ft/Min (Belt Speed) |
- Weight |
- 15.3 kg/m |
ASSEMBLY |
- Insert through bearing in Motor Attachment Kit |
- Fix with conveyor bearing 45, Part # 21.0993 on other side |
- Self aligning bearings on both sides compensate for misalignments created during belt tensioning and belt tracking setup. |
- Driving cylinder turned to keep belt centered and tracking properly |
-Total endless belt length (Board Length) for conveyors with conveyor 45 drive & idler rollers = 2 x Pulley CC + 165mm |