Timing Belt Pulley LR 6
Part. N° 28.0510
APPLICATIONS |
- Timing belt reverse unit for LR6 linear rail & slides |
- Re bore & key 8mm pilot to inch or metric size up to Ø14mm |
- Use as idler pulley |
- Light & medium duty linear motion |
- Use adaptor plate for mounting NEMA 23 & NEMA 34 motors & gearboxes |
TECHN. DATA / ITEMS SUPPLIED |
- Aluminum housing, Powder coated gray |
- 16AT5 aluminum pulley, 36 teeth |
- Qty 2, Ball Bearings |
- Qty 4, M8x20 C' sunk screws & M8 nuts |
- Bore Dia. |
- 8mm No key |
- Re borable to: |
- 14mm |
- Travel (1 Rev) |
- 180mm |
- Frictional moment at 1/1000 belt tensioning |
- .30 Nm |
- Max load |
- 30 Nm |
- Weight |
- .94 Kg. |
ASSEMBLY |
- Insert supplied M8 square nuts into rail |
- Feed timing belt thru pulley |
- Move pulley over rail & join supplied M8x20 C' sunk screws with square nuts (Don't tighten yet) |
- Fix timing belt on slide |
- Tension belt thru access holes in back See Picture |
- Tighten M8x20 C' sunk screws |
- Belt length in reverse unit = 160mm |
- Timing belt length = 2xRail Length + 260mm |