Rod Lock With One Rod & Handle 45 W/O Lock

Part. N° 21.1788/3

CAD DOWNLOAD ►  3D STEP | Solidworks 2008 | Inventor 2009

APPLICATIONS
- Holding a door closed using the top and/or bottom rails of the frame
- Especially useful for double doors
- Many possible configurations exist. Call or send a drawing of your design for technical assistance
TECHN. DATA / ITEMS SUPPLIED
1)  - Qty 1  Handle 45 Without Lock, Part # 21.1087/3
2) - Qty 1 Two Point Cam, Part # 21.1166
3) - Qty 1  Rod Cam Adaptor, Part # 21.1167
4) - Qty 1  Rod With Roller, Part # 21.1168
5) - Qty 1  Rod Guide 24, Part # 21.1169/9
6) - Qty 1, M6x16 SHCS, Part # 21.1238
7) - Qty 1, M6 Square Nut With Position Fixing, Part # 21.1330/2
   
ASSEMBLY
- Mill slot in profile left drawing)
- Alternatively drill Ø22mm hole thru profile & prevent rotation using the Twist Stop F, Part # 21.0941
-Fasten handle to profile using hex nut
- Fasten twp point cam to handle using M6 screw in handle end
- Remove clip washer from two point cam and snap on Rod Cam Adaptors
- Cut steel rod to size & insert in Rod/Cam Adaptor.  Tighten M5 hex bolt
- Fasten Rod guides to profile using supplied M6 screw & nut
- Place rod in groove & snap on cap